HW-Installation.GRUB1
[grep -v rootfs /proc/mounts > /etc/mtab] - ev. bei chroot oder QEMU-Boot
HW-Installation.Harddisk
chkdsk (Win, Repair-Console) ev. von QEMU
HW-Installation.KernelFunktionen
(je nach Definition, [?]QEMU )
HW-Installation.NetInstall
direct install via QEMU or vbox
HW-Installation.OfficeAutomation
firefox --new-tab http://www.ddy.ch/pm/laden/pm.wiki/HW-Installation/QEMU
firefox http://www.ddy.ch/pm/laden/pm.wiki/HW-Installation/QEMU
HW-Installation.Printer
z.B. QEMU
HW-Installation.QEMU
(:description - QEMU ad hoc, .iso anschauen, Linux installieren+testen, Stick-Installationen :)
Cat: Virtualisation QEMU
- Grub (QEMU-Gateway/gw:10.0.2.1)
sudo qemu -hda /dev/sdc -m 254 -kernel ./vmlinuz -initrd ./initrd.img -append "rw root=/dev/sda2" & (U804)
sudo qemu -hda /dev/sdb -m 254 -kernel ./vmlinuz -initrd ./initrd.img -append "rw root=/dev/sda6" & (U810)
sudo qemu -hda /dev/sda -m 254 -kernel ./vmlinuz -initrd ./initrd.img -append "rw root=/dev/hda9" & (lenny-Lenovo)
sudo qemu -cdrom /media/sda1/DownloadsSW/systemrescuecd-x86-0.4.2.iso -boot d /*xp-part*/
sudo qemu -cdrom /home/pogay/_DownLnxIso/emergencycd-3.0-ge.iso -boot d
qemu -snapshot -hda /dev/sdb
http://docs.projectblackdog.com/3rdParty/qemu/qemu-doc.html Dokumentation
QEMU-Shortcut
ctrl-alt 1/2 (Applikation-QEMU-Monitor
Ping kommt nicht zurück (Namensauflösung aber korrekt auf erster Zeile). -> eigene QEMU Firewall o.ä.
Beschleuniger: kvm (oder kqemu)
qemu-kvm
qemu-img create harddisk.img 10M
qemu-img create -f qcow arch.qcow 4G
qemu-img convert -f qcow hda.qcow -O raw hda.raw
qemu
qemu -cdrom -m 128 /dev/scd0 -boot d
qemu -L . -m 128 -cdrom /dev/cdrom
qemu -m 128 -cdrom /media/sda1/DownloadsSW/feather-0.7.5.iso
qemu -snapshot -hda /dev/sdb (Grub, dann Start)
sudo qemu -m 254 -hda /dev/sda -cdrom /home/pogay/Desktop/ubuntu-9.10-desktop-i386.iso -boot d &
qemu -hda /Pfad/zu/hdd.img -cdrom ubuntu.iso -boot d
qemu -monitor stdio -hda fedora.img -cdrom fedora_cd1.iso -boot d
qemu change cdrom fedora_cd2.iso
sudo qemu -hda /dev/sdc -m 254 -kernel ./vmlinuz -initrd ./initrd.img -append "rw root=/dev/sda2" (U804)
sudo qemu -hda /dev/sdb -m 254 -kernel ./vmlinuz -initrd ./initrd.img -append "rw root=/dev/sda6"
sudo qemu -hda /dev/sdc -m 254 -kernel ./vmlinuz -initrd ./initrd.img -append "rw root=/dev/hda6" (lenny)
"QEMU-Puppy"
$QEMU -kernel vmlinuz -initrd initrd.gz -append root=/dev/ram0 -hda pup_save.3fs -hdb pup_217.sfs -hdc devx_217.sfs -hdd zdrv_217.sfs -m 256 $*
qemu -kernel vmlinuz -append root=/dev/sdb7/ -snapshot -hda /dev/sdb7 -m 256
qemu -kernel vmlinuz -initrd initrd.img -append root=/dev/sdb7 -snapshot -hda /dev/sdb7
qemu -hda good.img -m 512 -kernel /mnt/loop/boot/vmlinuz-2.6.21.4-eeepc -append "rw root=/dev/sda1" (link)
qemu -hda /dev/sdb3 -m 254 -kernel ./vmlinuz -initrd ./initrd.img -append "rw root=/dev/hda3"
sudo qemu -hda /dev/sdc2 -m 254 -kernel ./vmlinuz -initrd ./initrd.img -append "rw root=/dev/hda2"
[ok]8.04: qemu: could not open disk image /dev/sdb3 (Lenny) - (Berechtigung)
On a side note you can run from the loopback device rather then the disk image file. Simply mount the disk image file 'sudo mount -o loop,offset=32256 good.img /mnt/loop' and run QEMU 'qemu -hda good.img -m 512 -kernel /mnt/loop/boot/vmlinuz-2.6.21.4-eeepc -append "rw root=/dev/sda1"'. This will bring you to the standard KDM login screen. I haven't worked out all the bugs yet but one thing you will have to do here is drop down to the terminal and set the 'user' password via passwd.
exec ./qemu -L . -hda harddisk -cdrom mydsl.iso -boot d -m 256 -enable-audio -user-net -localtime
START qemu.exe -L . -m 128 -hda harddisk -cdrom mydsl.iso -boot d -enable-audio -user-net -localtime
-# qemu-img create qemureact.img 512M
Formating 'qemureact.img', fmt=raw, size=524288 kB
-# qemu-img info qemureact.img
image: qemureact.img
-#mkfs -t vfat qemureact.img
VDE+QEMU User Mode Networking von Jim Brown VDE: Virtual Distributed Ethernet
qemu 'networking howto' Rob Miller
Dann noch ein /etc/qemu-ifup, das so aussieht:
- Inside the qemu VM, the following commands are required:
HW-Installation.QEMU-Networking
(:description - QEMU Networkung, mehrere QEMU kommunizieren :)
Cat: Virtualisation QEMU
QEMU-Server
QEMU-Server - Beispiel eines Webservers für Testzwecke
http://www.gnome.org/~markmc/qemu-networking.html
http://calamari.reverse-dns.net:980/cgi-bin/moin.cgi/QemuAndTuntap
QEMU
[ ] Wie bekommt der QEMU-Service eine IP-Adresse??
$> qemu -net nic,vlan=1 -net user,vlan=1
HW-Installation.QEMU-Server
(:description - QEMU Server betreiben :)
Category: Virtualisation QEMU
Cat: Virtualisation QEMU
Es soll über QEMU ein Server betrieben werden:
http://qemu-forum.ipi.fi/viewtopic.php?f=4&t=171
Netz für QEMU
qemu -m 254 -hda /dev/sdb -redir tcp:5556:10.0.2.15:22
QEMU im Background
http://qemu-forum.ipi.fi/viewtopic.php?f=4&t=171
screen -dmS MyQemu sudo qemu -hda /dev/sdb -snapshot -m 256
screen -r MyQemu
qemu -hda /dev/sdb -nographic -serial null -monitor null
qemu -hda /qemu/xp.cow -boot c -cdrom /data/install/admin/os/windows/winxpsp3ue.iso -m 384 -k sg -vnc *:0 -daemonize -localtime
HW-Installation.QEMUUserSpace
(:description - QEMU Direkte Emulation von Befehlen :)
Cat: Virtualisation QEMU
aus: http://wiki.qemu.org/download/qemu-doc.html#Wine-launch
qemu-i386 -M ? / was für Maschinen?
qemu-i386 -L / /bin/ls / Befehl ueber QEMU ausführen
qemu-i386 /bin/ls / wie oben, DFT
qemu-i386 /usr/bin/qemu-i386 /bin/ls / verschachtelt
wine aus qemu:
qemu-i386 /usr/local/qemu-i386/bin/ls-i386
qemu-i386 /usr/local/qemu-i386/wine/bin/wine /usr/local/qemu-i386/wine/c/Program\ Files/putty.exe
qemu-arm
HW-Installation.QEMUWin
Qemu fuer Windows
http://www.h7.dion.ne.jp/~qemu-win/
http://www.h7.dion.ne.jp/~qemu-win/HowToFloppyCdrom-en.html
cd qemu-0.12.2-windows
qemu.exe -m 254 -hda \\.\PhysicalDrive2 (USB Laufwerk D: / Bootloader Grub2)
[1] QEMU stürzte nach eine Weile ab.
HW-Installation.RecentChanges
HW-Installation.SideBar
HW-Installation.Survival
Qemu
| 
